Differences

This shows you the differences between two versions of the page.

--- voip:cisco:7960_ip_phone [2016/03/17 22:42] – created rplecko
+++ voip:cisco:7960_ip_phone [2021/10/07 11:24] (current) – rplecko
@@ Line 1: / Line 1: @@
 ==== 7960 ====
-===Reset the 7940 and 7960 IP Phones to the Factory Default===
+=== Reboot phone ===
-In order to perform a factory reset of a phone if the password is set, complete these steps:
+To reboot Cisco 7940/7960 IP phone hold down the following keys :
-  - Unplug the power cable from the phone, and then plug in the cable again.
+''*'' and ''6'' and ''Settings''
-       The phone begins its power up cycle.
+=== Unlock phone ===
-  -     Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #.
+Press ''Settings''→ scroll down the screen to option 9 ''Unlock Config'' \\
+Deault password is <fc #ff0000>cisco</fc>
-  -     The Headset, Mute, and Speaker buttons flash in sequence in order to indicate that the phone waits for you to enter the key sequence for the reset.
+=== Reset the 7940 and 7960 IP Phones to the Factory Default ===
-    Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.
+In order to perform a factory reset of a phone if the password is set, complete these steps:
+  - Unplug the power cable from the phone, and then plug in the cable again.
-    If you repeat a key within the sequence, for example, if you press 1223456789*0#, the sequence is still accepted and the phone resets.
+The phone begins its power up cycle.
-    If you do not complete this key sequence or do not press any keys, after 60 seconds, the Headset, Mute, and Speaker buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.
+  - Immediately press and hold ''<fc #ff0000>#</fc>''  and while the ''<fc #00ff00>Headset</fc>'', ''<fc #ff0000>Mute</fc>'', and ''<fc #00ff00>Speaker</fc>''  buttons begin to flash in sequence, release ''#''.
+  - The Headset, Mute, and Speaker buttons flash in sequence in order to indicate that the phone waits for you to enter the key sequence for the reset.
+  - Press **<fc #ff0000>123456789*0#</fc>**  within 60 seconds after the ''<fc #00ff00>Headset</fc>'', ''<fc #ff0000>Mute</fc>'', and ''<fc #00ff00>Speaker</fc>''  buttons begin to flash.
-    If you enter an invalid key sequence, the buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.
+  * If you repeat a key within the sequence, for example, if you press **<fc #ff0000>1223456789*0#</fc>**, the sequence is still accepted and the phone resets.
+  * If you do not complete this key sequence or do not press any keys, after 60 seconds, the Headset, Mute, and Speaker buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.
+  * If you enter an invalid key sequence, the buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.
-    If you enter this key sequence correctly, the phone displays this prompt:
+  - If you enter this key sequence correctly, the phone displays this prompt:
-    Keep network cfg? 1 = yes 2 = no
+Keep network cfg? 1 = yes 2 = no
-    In order to maintain the current network configuration settings for the phone when the phone resets, press 1. In order to reset the network configuration settings when the phone resets, press 2.
+  * In order to maintain the current network configuration settings for the phone when the phone resets, press 1. In order to reset the network configuration settings when the phone resets, press 2.
+  * If you press another key or do not respond to this prompt within 60 seconds, the phone continues with its normal startup process and does not reset. Otherwise, the phone goes through the factory reset process.
-    If you press another key or do not respond to this prompt within 60 seconds, the phone continues with its normal startup process and does not reset. Otherwise, the phone goes through the factory reset process.