Differences

This shows you the differences between two versions of the page.

--- voip:3cx:stun_01 [2016/07/12 15:20] – rplecko
+++ voip:3cx:stun_01 [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 33: / Line 33: @@
 It is always a good option to test the stun server before using it. 3CX provides it’s own stun servers (stun.3cx.com and stun2.3cx.com) but it is very important that if you have a VoIP Provider from VoIP Company XYZ, to use the stun server address provided by VoIP Company XYZ. You can use the 3CX Stun server but probably the stun server of your VoIP telecom company will be closer to you and might have less traffic so the response you get back will be quicker.
-…and the most important… (cannot find this on 3CX website..)
+<hi #b5e61d>…and the most important… </hi>
 Since the STUN resolution is the source of many (if not the most…) problems concerning 3CX configuration, disabling it is your primary goal. Unfortunately you cannot do it the easy way because you will be expected to enter your fixed public IP before saving configuration, and if you don't have it (if you are on any kind of ADSL, you probably don't….) you cannot disable STUN !!
@@ Line 39: / Line 39: @@
 But…
-If you have properly configured your router (forwarded all the neccessary ports to your 3CX server…) there is no n eed for STUN and there is the way to disable it. (Description is for the 3CX version 12 and 12.5 but hopefully there are no major differneces on newer versions).
+If you have properly configured your router (forwarded all the neccesary ports to your 3CX server…) there is no need for STUN and there is the way to disable it. (Description is for the 3CX version 12 and 12.5 but hopefully there are no major differences on newer versions).
-Open Voip Providers. Choose provider and open Advanced tab.
+Open ''Voip Providers''. Choose provider and open ''Advanced'' tab.
-Under Registration Settings → Which IP to use in 'Contact' field for registration click on Specified IP and type in the local IP address of your 3CX server !
+Under ''Registration Settings'' → **Which IP to use in 'Contact' field for registration:** click on **Specified IP** and type in the local IP address of your 3CX server !